- #Manual axis camera station manual#
- #Manual axis camera station full#
- #Manual axis camera station software#
If your device is not connected to a network or there is no DHCP server available, enter the IP address, subnet mask, gateway, and preferred DNS manually depending on the network requirements.Ĭlick Finish. If your device is connected to a network with a DHCP server, the assigned IP address, subnet mask, gateway, and preferred DNS are automatically displayed. Use automatic IP settings (DHCP) and Use automatic DNS settings are turned on by default. Under Network settings, configure the following settings and click Next.
#Manual axis camera station manual#
To set manually, select Manual and select a date and time. To set up an NTP server, select NTP server and enter the NTP server address. Under Date and time, configure the following settings and click Next. See Settings.Ĭhange the computer name if you want and click Next. To change the switch’s settings, go to the switch’s management page. USB 2.0 connector x2 (for keyboard and mouse) PoE enabled network connectors, port 1-12 Difficulty levelĭedicated surveillance network with no interconnectivity to another external networkĬhange the default password for the built-in switch As soon as you plug the cameras into the PoE ports, the cameras will power on and obtain an IP address and be accessible via AXIS Camera Station. The built-in switch’s DHCP server is enabled by default. This setup is a basic plug and play installation. You can create an independent surveillance network which has no interconnectivity to another external network. The server uplink U2 is an external network interface that can connect to an existing network.ĭevices connected to server uplink U2 can not communicate with devices connected to the switch directly.ĭevices connected to server uplink U2 can communicate with devices connected to the switch through AXIS Camera Station. The switch and computer communicate through the internal uplink connectors: one is located on the switch Power Circuit Board and the other is located on the computer motherboard. The switch and computer are two separate parts.
#Manual axis camera station software#
Switch: Built-in Power over Ethernet (PoE) switch.Ĭomputer: Preloaded with all necessary software you need to create a surveillance solution including the video management software AXIS Camera Station. With the operating system stored on a solid-state drive (SSD) and 5-year hardware warranty, the appliance series provides a reliable surveillance solution.Īn AXIS Camera Station S22 Appliance consists of two parts:
#Manual axis camera station full#
AXIS Camera Station offers an intuitive user interface that allows users to take full advantage of Axis wide range of video surveillance cameras and other IP products. For quick and easy installation, the appliance series is preconfigured and preloaded with AXIS Camera Station video management software including licenses plus all necessary system software. AXIS Camera Station S22 Appliance series is an all-in-one recording solution with integrated, manageable PoE switch designed to deliver reliable high-definition surveillance with up to 4K resolution.
0 kommentar(er)
